Description The MPower Tenoner SET 3 machine is designed and built to withstand continuous use. It’s cast iron base ,column and slide ways provide a ridged and durable mainframe assembly ,and the high output motors supply ample power, 2.2 KW 3 Phase . The large ground cast iron sliding table slides easily on its ball race supported wheels ,and cutterhead slide movements are smooth and easily adjustable on dovetail slides. Extremely versatile and taking only minutes to set up , the MPower SET 3 Tenoner is easy to use and accurate in operation. Work is positioned on the rolling table against an end stop and a fence, and is secured by a cam action lever. Its end is then passed between 2 vertically mounted cutter heads which machine the top and bottom cheeks of the tenon. The tenon width is set by raising or lowering the top motor,and its position on the timber by raising or lowering the two motors in tandem. Variations in shoulder length are set using the rule on the end stop and staggered tenons are achieved by simple handwheel adjustment of the top motor, with digital counters to help the measurements. Each cutting head has provision for profile knives to enable the cross section of the components being jointed to be matched. The standard scribing head allows many different configurations of tenons to be achieved. Stepped tenons, splayed tenons, scribed tenons, double tenons, and multiple bridals and finger joints, are all possible on this versatile machine. Combinations of 90* and bevelled cutting discs with appropriate spacers can also be fitted to produce interleaved joints as used in sash window construction. Please note 32amp, 3-phase supply required. Technical Motor 2.2Kw 3 phase / single phase Timber capacity 130 x 310mm Timber capacity with fence at 45 degrees 130 x 250mm Max. length of tenon 155mm Max. length of tenon – 2 passes 205mm Vertical adjustment of bottom cutter block 0 to 60mm Vertical adjustment of top cutter block 0 to 120mm Horizontal adjustment of top cutter block /-32mm Table size 800 x 310mm Table working height 860mm Main Cutter heads 175 x 60 x 30mm Scribing Head Motor 4.0Kw (5.5hp) 3 phase2.2kw (3hp) single phase Cutter block 150 x 60 x 30 ALU Shaft diameter 30mmend-tapped M12; 8mm keyway Effective length of shaft 75mm Vertical movement 95mm Horizontal movement 30mm Max. diameter of tooling 210mm Vertical stroke 150mm
